| Company |
Product |
Exp. Date |
|
Custom Linings, Inc.
|
Custom Linings 911
Custom Linings 911 is a 100% solids, zero VOC, two-component spray applied pure polyurea. Custom Linings 911 offers a tack free time of less than fifteen seconds and exhibits 450% elongation upon curing with 50 shore D hardness. It has excellent thermal stability, chemical resistance and meets USDA criteria. Custom Linings 911 is suitable for application over metal, concrete fiberglass, wood and geotextile fabrics at temperatures well below freezing. Custom Linings also provides 911 blends specifically designed for Containment, Potable Water and Blast Mitigation Systems.
click here for more information
|
7/30/2011 |
|
Elastomer Specialties, Inc.
|
Elastogard ARC-SG
ElastoGard ARC-SG is a 100% solids, aromatic, 1:1 ratio, high pressure pure polyurea spray system. Developed for the protection of concrete, steel, aluminum, wood or fiberglass surfaces, ARC-SG has a 20 second gel time and a 45 second tack free time. Because of its slow gel time this product is excellent for applying directly to GeoTextile fabric for both primary and secondary containment. ARC-SG can be top coated with a pure aliphatic polyurea for color stability or an automotive urethane based paint. For additional details go to www.elastomer.com
click here for more information
|
8/12/2011 |
|
Fox Industries, Inc.
|
FX-640
Sprayable Aromatic Polyurea
click here for more information
|
8/3/2011 |
|
Fox Industries, Inc.
|
FX-644
Chemically Resistant Aromatic Polyurea
click here for more information
|
8/3/2011 |
|
Fox Industries, Inc.
|
FX-645
Brushable Aliphatic Polyurea
click here for more information
|
8/3/2011 |
|
Fox Industries, Inc.
|
FX-646
Sprayable Aliphatic Polyurea
click here for more information
|
8/3/2011 |
|
Polycoat Products
|
Polyeuro® 5502
Polyeuro® 5502 is a fast set, rapid curing, 100% solids, 50-55 D hardness flexible, aromatic, two component 100% pure spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
|
2/13/2010 |
|
Polycoat Products
|
Polyeuro® 5901
Polyeuro® 5901 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component 100% pure spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
|
2/13/2010 |
|
Polyval Coatings Inc.
|
Polyflex PW
Polyflex PW is a NSF 61listed high performance Polyurea coating/lining for both steel and concrete tanks. Polyflex PW offers superior service life in a variety of climatic conditions for potable water.
click here for more information
|
7/2/2011 |
|
Polyval Coatings Inc.
|
POLYFLEX 201
Polyflex 201 is a high performance, Polyurea membrane. It provides excellent waterproofing, corrosion and abrasion resistance and can be used in a great variety of different climatic conditions. It provides excellent protection and
durability in continuous water immersion.
click here for more information
|
8/3/2011 |
|
Polyval Coatings Inc.
|
POLYFLEX 401
Polyflex 401 is a high performance, aromatic Polyurea membrane. It provides excellent abrasion and shock absorbing resistance and can be used in a great variety of different climatic conditions. It provides excellent protection especially
when service conditions require flexibility and protection in cold temperatures and below freezing point.
click here for more information
|
8/3/2011 |
|
Quantum Technical Services, Ltd.
|
PRECIDIUM 550D-FR
PRECIDIUM™ 550D-FR is a Patent Pending, fire resistant - Class A Flame Spread - Low Smoke, high performance polyurea elastomer. 550D-FR is tested to ASTM; E-162,E-84, E-662, E-648,E-1354 as well as BSS-7239. PRECIDIUM™ 550D-FR provides the most outstanding fire performance in its class.
|
7/30/2011 |
|
Reactamine Technology, LLC
|
RSP
RSP Silicone Polyurea, is a two component 100% solids Polyurea with a patent protected, silicone modification that does not create inter-coat adhesions problems. RSP displays extremely fast cure times with excellent adhesion to multiple substrates. It can be spray applied at temperatures ranging from 20°F to 150°F and has superior chemical and water resistance. RSP offers superior chemical resistance and flexibility compared to conventional Polyurea technology. RSP has a functional temperature range of -40°F to 250°F.
click here for more information
|
8/4/2011 |
|
Reactamine Technology, LLC
|
Extra Tough
EXTRA TOUGH - Aromatic Polyurea is a two component 100% solids Polyurea with superior performance in industrial applications. EXTRA TOUGH offers a range of gel times from 7 seconds to 20 minutes with excellent adhesion to multiple substrates. It can be spray applied at temperatures ranging from 20°F to 150°F and has excellent chemical and water resistance. EXTRA TOUGH has a functional temperature range of -40°F to 250°F.
click here for more information
|
8/4/2011 |
|
Specialty Products, Inc.
|
Ultra Bond-100™
Ultra Bond-100™ is a high tensile, high build fast-set elastomer specifically formulated to provide a tenacious bond to certain thermoset plastic surfaces. Unlike most spray applied polyureas, Ultra Bond-100™ has a unique advantage of adhering to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation. This product has good physical properties with both high tensile strength (3,000 psi) and elongation value (300%). Ultra Bond-100™ is eco-friendly, contains 100% solids with no solvents or VOC's (Volatile Organic Compounds).
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
Aquaseal™
Aquaseal™ is a high performance, spray applied, fast-set, pure Polyurea elastomer. This product has an extended tack time to allow deep surface penetration. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Aquaseal™ is an ideal solution for filling or repairing control joints, random cracks and shallow spalls on horizontal concrete surfaces. This product can be applied with high pressure, heated equipment or SPI – LPG low pressure, ambient temperature application equipment. Aquaseal™ is a pure 100% solids Polyurea that contains no solvents or VOCs.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
EPL-9™
EPL-9™ is a slow set self-leveling elastomer, with a gel time of approximately 9 minutes. This product may be mixed by hand, through a static mixer or sprayed. EPL-9™ is ideal for use as a self leveling base coat, spot repair of pre-existing coatings, deck repairs, crack repairs, hard to reach places not accessible by spray equipment, control joint filler, warehouse floor repairs, etc. This unique elastomer contains 100% solids, Zero VOC’s and meets FDA/USDA criteria for incidental food contact.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
K5™
K5™ is an ultra-high strength coating originally developed as a resilient, blast-resistant polymer. Soon after, it was discovered that K5™ is exceptionally resistant to abrasion wear and tear, compared to other spray applied coatings. This coating has superior tensile strength (5500 psi) and strain modulus, with 300% elongation. Compliant with FDA/USDA for incidental food contact. K5™ is a spray applied, fast-set, 100% solids, pure Polyurea that contains no solvents or VOCs.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
Dragonshield™
Dragonshield™ is a high build, fast set, polymer with a combination of physical properties which have proven to be very effective as an Energy Absorbing (EA) material. Dragonshield™ polymer has been tested and verified as a protective material for mitigating damage caused during a blast event. When placed on the interior wall of a structure, Dragonshield™ effectively reduces pressure levels occupants must physically endure, while protecting them from fragmenting projectiles. The reduction in pressure also minimizes the deflection of the wall during a blast event.
This ultra-high strength barrier coating significantly reduces blast fragmentation. It is capable of sustaining multiple hits and immediately reseals upon penetration (self-sealing). Dragonshield™ has been independently tested on a variety of substrates by a number of military and Government entities and laboratories. (Tests available upon request). Visit SPI’s website to learn more about Dragonshield™ and view informative product videos.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
PTU™
PTU™ the chemical resistant polyurea. PTU™ is a new generation of high performance polyurea coating and is the result of six years of development and field testing. Spray applied elastomer with chemical resistance performance comparable to many epoxies. Single application process and self-priming in most instances, giving substantial project labor savings. Fast return to service within hours, not days, that maximizes uptime revenue. PTU™ has superior flexibility compared to epoxies, allowing the coating to move with substrate expansion and contraction. Visit SPI’s website to learn more about PTU’s™ and watch informative product videos.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
Polyshield HT™
Polyshield HT™ is the Polyurea industry’s workhorse for your most demanding applications. This advanced polymer combines high tensile strength (>4000 psi) and excellent elongation (600%) for projects requiring a tough, yet resilient coating. ASTM E84 tested and compliant with NFPA and UBC Class 1 Fire Rating. Polyshield HT™ is a spray applied, fast-set, 100% solids, pure Polyurea that contains no solvents or VOCs.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
Watersafe 100-NSF™
Watersafe 100-NSF™ is ANSI/NSF 61 approved for potable water use. It has a very fast gel time that enables product application in most temperatures. This product is compliant with FDA/USDA for incidental food contact. Watersafe 100-NSF™ is a spray applied, fast-set, 100% solids, pure aromatic Polyurea that contains no solvents or VOCs.
click here for more information
|
9/2/2011 |
|
Specialty Products, Inc.
|
Polyshield Hi-E ™
Polyshield Hi-E™ - Ultra high elongation (>700%) combined with superior tensile strength, this pure Polyurea coating is ideal when elongation is critical. It adheres to concrete, wood, metal, glass, polyurethane foam and geo-textiles, making it a good chose for projects such as waterproofing, roofing, water features and pond liners. ASTM E84 tested and compliant with NFPA and UBC Class 1 Fire Rating. Compliant with FDA/USDA for incidental food contact. Polyshield Hi-E™ is a spray applied, fast-set, 100% solids, pure Polyurea that contains no solvents or VOCs.
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
AR520 PW
520% Elongation, Potable Water, Aromatic Polyurea Lining
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
AR-200 HD
200% Elongation, Heavy Duty Aromatic Polyurea Coating and Lining
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
JS80 SL
80 Durometer Hardness Shore D, Self-Leveling Polyurea Joint Sealant
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
AR425
425% Elongation, Aromatic Polyurea Coating & Lining
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
AR520 SS
520% Elongation, Slow Setting Aromatic Polyurea Coating
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
AR530
530% Elongation, Brush Grade Aromatic Polyurea
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
EnviroLastic PA Polyaspartic
This 100% solids, spray applied aliphatic polyaspartic polyurea exhibits excellent color and gloss retention and UV stability. Can be applied at thicknesses of 8 -12 mils in a single pass on horizontal surfaces. Rapid cure, high abrasion resistance and chemical resistant.
click here for more information
|
9/2/2011 |
|
The Sherwin-Williams Company
|
EnviroLastic LT Primer
This low temperature polyurea primer for steel and concrete dries quickly for rapid recoat and project turnaround.
click here for more information
|
9/2/2011 |
|
United Coatings Manufacturing Co.
|
ELASTUFF 300
100% Solids elastomeric aromatic pure polyurea for spray systems. It sets rapidly to form a highly durable membrane exhibiting excellent abrasion and chemical resistance. ELASTUFF 300 was formulated to achieve an optimum balance of physical properties, including exceptional tensile strength, tear strength, impact resistance and elongation. Its high Durometer finish also exhibits outstanding thermal stability and good UV resistance.
click here for more information
|
8/25/2011 |
|
United Coatings Manufacturing Co.
|
Elastuff 200
ELASTUFF 200 is a high performance, 100% solids, aliphatic pure polyurea elastomer coating. ELASTUFF 200 cures rapidly to form a highly durable membrane exhibiting excellent gloss and color retention. ELASTUFF 200 was formulated to achieve an ideal balance of physical properties, including exceptional tensile strength, tear strength and elongation. Its high Durometer finish also exhibits high chemical, abrasion and impact resistance. ELASTUFF 200 is a fast cure material, applied using heated plural-component spray equipment. was especially developed as a superior UV stable topcoat for protecting a wide variety of vertical and horizontal substrates. ELASTUFF 200 is an ideal choice for protecting aromatic basecoats from extended exterior exposure, or for use on its own over primed steel, concrete, masonry and fiberglass substrates.
click here for more information
|
8/25/2011 |
|
VersaFlex Incorporated
|
FSS-45D
Pure aromatic polyurea spray system targeted for applications requiring better elongation characteristics.
click here for more information
|
8/13/2011 |
|
VersaFlex Incorporated
|
AquaVers-405
Pure polyurea spray coating system meeting ANSI/NSF-61 requirements for potable water applications. Exhibits superior elongation and durability characteristics.
click here for more information
|
8/13/2011 |
|
VersaFlex Incorporated
|
FSS-50D
Pure polyurea aromatic spray system targeted for applications requiring tougher surface characteristics and faster set times.
click here for more information
|
8/13/2011 |
|
Willamette Valley Company
|
PolyQuik P-480
click here for more information
|
7/30/2011 |
